florida cleanroom systems 4

"Velocity™" Modular Cleanroom Systems
The Full View Cleanroom Environment

florida cleanroom systems 092   "Velocity™" modular cleanroom systems and components are designed and engineered to maximize value added to any commercial high quality facility requiring  the utilization of cleanrooms designed and built to fully comply with FDA, cGMP, USP, USDA, cleanroom regulatory standards and specifications.

florida cleanroom systems 099
shadow  "Velocity™" cleanroom designs and packages are available for all DIY installations or full turnkey installations to meet budget, specifications and process requirements.

  From flush interior surfaces to high visibility panel systems ""Velocity™" modular cleanroom systems can be designed and engineered as passive, recirculating, plenum supply, or direct ducted air distribution systems fully capable of managing airflow and directing clean particulate free air to the required process areas or equipment.

florida cleanroom systems 117
shadow   "Velocity™" modular panel inserts, windows, doors, and ceiling systems are fully gasketed with antimicrobial closed cell gasketing systems to fully minimize the air leakage typically experienced with lesser systems. Cleanroom air leakage causes excess operation of the cleanroom air handling systems and distribution systems controls and will ultimately affect cleanroom operational cost and maintenance cost. We believe our connection points and assembly results in  the highest airtight modular cleanroom assembly available without utilizing fully seamless construction methods.

florida cleanroom systems 113
   "Velocity™" modular cleanroom systems are available in two styles, our "V-2.625" non thermal break system for installation into ambient air  conditioned spaces and our V-3.142" thermal break system for R-12 performance in non air conditioned spaces.    

Florida Cleanroom Systems 6.1

Advantages of "Velocity™" Modular Cleanroom Systems:
  • Custom Packaged Shipments, palletized or individually packaged components for either unloading by forklift or hand.  Modular panel components, non-palletized,  sized to fit through standard 3'0" x 6'8" door openings.
  • Designed and Engineered for DIY installations, with complete assembly drawings, shop drawings and installation instructions. Signed and sealed drawings available at additional cost for building department reviews. 
  • Reduced A/E Cost, factory generated shop drawings, details, and engineering calculations greatly reduce architectural and engineering cost associated with designing and engineering from scratch.
  • Reduced Construction Scheduling, time saving fully pre-fabricated and pre-finished wall frames and wall sections allow installation crews to work in 8' to 16' sections versus handling individual 4' panels.
  • Reduced Construction Cost, labor saving fully pre-fabricated and pre-finished wall sections install in 1/3 the time as conventionally constructed wall systems.
  • Reduced Utility Systems Cost, pre-wired modular electrical systems will  greatly reduce the cost when compared to conventional piping field installations of the same electrical components. Modular low voltage wiring systems and cat5 cabling systems along with flexible fire sprinkler systems further reduce field construction time and labor. All systems are fully relocatable with cleanroom structure.
  • Reduced VOC Emissions, Fully pre-finished components reduce VOC emissions within your facility due to no use of adhesives or paints.
  • Reduced Tax Liability, can be considered capital equipment instead of capital improvements; therefore, they can be depreciated at an accelerated rate. .
  • Reduced Safety Cost, modular systems install with 1/3 the labor required by conventional construction. Reducing personnel and associated insurance and safety cost.
  • Reduced Maintenance Cost, antifungal and antimicrobial components reduce the daily cleaning requirements with powdercoated finishes reducing the cost of refinishing systems over time.
  • Reduced Renovation Cost, expanding a modular cleanroom can be easily accomplished by taking off a wall and adding another module. The prefabricated design allows the room to be expanded, relocated, or reconfigured into a different shape or made into multiple smaller rooms.
  • Reduced Lease Termination Cost, modular cleanroom systems cause minimal impact on building systems and structure reducing return to origin cost associated with leased facilities.
  • Reduced Relocation Cost, modular cleanroom systems are typically 95% relocatable when the time comes to relocate to a new facility. You take it with you.
  • Consistent Fit and Finish, high speed manufacturing systems with quality assurance checkpoints assure consistent fit and finish of all components. 
  • CleanBuild Construction, pre-fabricated and pre-finished modular components minimize field cuts and fitting reduces the construction generated particulates normally associated with conventional construction. 
  • Fully Interchangeable Panel Inserts, allow for repositioning of solid, glass, door or pass through device panels of like sizes to accommodate changes in process flow or equipment layouts.
  • Clear View Floor to Ceiling Glass, or acrylic up to 10' high for maximized view of process and operational protocols. Allows for supervision of cleanroom processes and personnel without the need to enter the cleanroom environment.
  • Window Systems up to 120" wide without the need for horizontal post interruptions for gallery type views of cleanroom interiors. Allows for uninterrupted views for clients, supervisors, or inspectors.   
  • Manufactured to ISO, cGMP, FDA, USP-797 Regulatory Standards, to comply with ISO 14644-4 design and construction of cleanroom facilities.

   Additional advantages, architectural details, and engineered drawings   of  "Velocity™" modular cleanroom systems can be further explored via our "Velocity™"  downloads located in our PDF downloads section.

Site Map | Contact Us